SELCO SELCO E7800.0740 Motorized Potentiometer. 24V DC, 0.8-6 rpm, 10 turn, 500Ω
€605.20 Excl. VAT
SELCO-MOTORIZED POTENTIOMETER-24V DC-0.8-6 rpm-10 turn- 500Ω
Product Attachment : PDF
Available on backorder
●Sealed wire wound potentiometer
●Built-in dust seal
●Low speed motor for accurate control
●High drive capability
●Resistance from 100 ohm to 10 kohm
●Large size knob for manual control
●LED indication of turn direction
●Optional programmable RPM
●AC or DC supply
The SELCO E7800 Motorised Potentiometer is normally used as a link between increase/decrease relay contacts (or push buttons) and equipment requiring control from an external potentiometer (e.g. the speed trim of an electronic governor).
All three wires of the potentiometer are easy to connect to, on external terminal block, therefore providing the best possible flexibility for almost any application.
The design of the E7800 is made so, the potentiometer will “remember” its position even when supply is lost.
The potentiometer can easily be replaced when installed. There are access from the back of the device, when the four corner screws are removed. With an alan key the coupling can be taken of the potentiometer shaft, and a new potentiometer can be installed in the reverse order.
The supply to the unit is so it only has active power when movement is needed. The neutral or minus is connected at all times, but only when movement is needed is the line or positive connected to either a terminal for increase or for decrease.
|30 × 20 × 20 cm